Gas Leakage Detector

GAS LEAKAGE DETECTOR

Gas leaks can be incredibly dangerous, even small ones. 

Run a quick check over your house or gas powered devices to make sure all outlets are safely sealed. 

Hold the power button for a few seconds and then place the detector near the suspected leak and visual/audible warnings will sound if the leak is bad, moderate or safe.

 Red (Hi), orange (Lo), and green (safe) LEDs denote the severity of the leak.

Indications:

Green – Power on with short beep / safe with no alarm

Yellow – Lo alarm with short beep >2000ppm (0.2%) of methane (natural gas) detected

Red – Hi alarm with long beep >4000ppm (0.4%) of methane (natural gas detected

Specifications:

? Measurement ranges: 0-10,000 ppm

? Power on: Press and hold for 3 seconds

? Auto power off: Approximately 3 minutes

? Requires 2 x ALKALINE AAA batteries (not included),

BATTERY 1.5V AAA/AM4 ALKALINE TYPE FRESH BATTERIES

? Sensor detects butane, propane, acetylene, and methane (natural gas)

? Dimensions: 165(L) x 27(W) x 21(D)mm